IMPERVIUS™ ME
IMPERVIUS™ ME is a two-component modified epoxy designed to protect reinforced concrete, steel plates and FRP composite bridge decks from the adverse effects of traffic and extreme weather conditions. IMPERVIUS™ ME provides a skid resistant surface that meets applicable ASTM, AASHTO and state specifications.This modified epoxy may be used as a resin binder layer on a variety of substrates, or as a polymer concrete depending on use and exposure.
IMPERVIUS™ ME Benefits:
- 100 percent solids
- Prevents ingress of water and deicing chemicals
- Excellent adhesion to concrete, steel, asphalt and FRP composites
- Adheres to aggregates for extended periods of time
- Skid resistant
- Tough polymer system to withstand minor movements
- Quick process for high-traffic areas
IMPERVIUS™ ME Data*:
|
Property |
Value |
Test Method |
|
Percent Solids |
100% |
|
|
Adhesion @ 24 Hrs. |
250 psi |
ASTM D 4541/ ACI 503R |
|
Tensile Strength, 7 Days |
2200-5000 psi |
ASTM D 638 |
|
Tensile Elongation, 7 Days |
45 ± 10% |
ASTM D 638 |
|
Permeability @ 28 Days |
100 Coulombs Max. |
ASTM T 277 |
|
Water Absorption @ 24 Hrs. |
.5% Max. |
ASTM D 570 |
|
Thermal Compatibility |
No Delamination |
ASTM C 884 |
|
Compressive Strength |
> 1000 psi |
3 Hrs. ASTM C 109 |
|
Compressive Strength |
> 5000 psi |
24 Hrs. ASTM C 109 |
* Samples cured at 75°F and 50% RH. Results can vary depending on mixing method, equipment, curing conditions, test equipment, sample handling, sample conditioning, consistency and technicians.
For more information about our packaging and application, download the IMPERVIUS™ ME Data Sheet, or contact P3 to get started today.